Medium Shock Absorbers

Medium Shock Absorbers

Medium Self-Compensating Shock Absorbers Sizes from M45 to M115

This series identifies medium and large self-compensating models. The self-compensating series with fixed calibration allows to apply the decelerator correctly sized during the design phase choosing among the various hardnesses available. Once installed, it guarantees linear deceleration even in the presence of small variations compared to what is dimensioned. In this series the precision in deceleration control has been exceptionally improved compared to other products currently on the market. The piston diameter has been increased, increasing its absorption capacity by 200% and the "effective mass" range has been further expanded.

  • The external body, fully threaded, can be mounted and fixed in precise positions and its larger surface can dissipate more thermal energy
  • The surface treatment of the body has improved corrosion resistance with a special Fuchs coating
  • The stop collar is not necessary. With the addition of the urethane cap on the head the impact noise decreases considerably
  • The surface finish is burnished but can be supplied nickel-plated on request
  • The bearing, made with material for long-term use, protects the seal and guarantees a long life
  • Standard speed range: 0.3 ~ 5 m/s
  • Low speed: option
  • Standard temperature range: -10 ~ 80 °C - Special: -40 ~ 120 °C
Main models:
  • IASS45 strokes from 25 to 75 mm
  • IASS64 corse from 50 to 150 mm
  • IASS85 corse from 50 to 250 mm
  • IASS115 corse from 50 to 250 mm
IASS Series Learn more...

 

Medium Adjustable Shock Absorbers from M45 to M85

This series identifies the medium and large size adjustable models. This series has a 12 step fine adjustment based on impact speeds. The precision in deceleration control has been exceptionally improved compared to other products currently on the market. The piston diameter has been increased, increasing its absorption capacity by 200% and the "effective mass" range has been further expanded.

  • The external body, fully threaded, can be mounted and fixed in precise positions and its larger surface can dissipate more thermal energy
  • The surface treatment of the body has improved corrosion resistance with a special Fuchs coating
  • The stop collar is not necessary. With the addition of the urethane cap on the head the impact noise decreases considerably
  • The surface finish is burnished but can be supplied nickel-plated on request
  • The bearing, made with material for long-term use, protects the seal and guarantees a long life
  • The 12-step fine adjustment ensures maximum calibration accuracy during commissioning
  • Standard speed range: 0.3 ~ 5 m/s
  • Low speed: option
  • Standard temperature range: -10 ~ 80 °C - Special: -40 ~ 120 °C
Main models:
  • IAAD45 strokes from 25 to 75 mm
  • IAAD64 strokes from 25 to 150 mm
  • IAAD85 strokes from 25 to 150 mm
IAAD Series Learn more...

 

Available accessories:

Lock Collar
Allows the clamping of the shock absorber in a hole
Lock Collar Learn more...
Stop Collar
Reduces the used stroke of the shock absorber while maintaining the mechanical stop
Stop Collar Learn more...
Square Flange, Rectangular Flange
Fixing supports
Square Flange, Rectangular Flange Learn more...
Clamp Mount
Fixing support, internally threaded with screw tightening
Clamp Mount Learn more...
Urethane Cap
It is used to reduce the noise of the impact on the stem
Urethane Cap Learn more...
End Clevis, Rod Clevis
Joint fixing for body and stem
End Clevis, Rod Clevis Learn more...